Products:
Water Treatment Equipment:
Waste Water Treatment
Go Green Products Click here for list of our green products.
Our Systems that Clean Water were developed in order to Discharge, Reclaim or Recycle Waste Water
in compliance with EPA (Environmental Protection Agency)
and other applicable regulations.
Waste water treatment equipment is used in both
single-pass/sewer discharge systems and recycle/zero discharge systems.
Innovator Series - EC2 - Electro-coagualtion System Brochure This is an advanced Electro-coagulation (EC) system for treating wash water and other industrial waste water that contains suspended solids, emulsified
oils, and heavy metals. This system combines both EC water treatment technology and chemical flocculation to enhance and speed up the
process of removing constituents from the waste water.
The patent pending design of the Water
Maze EC-20A system allows an extremely
efficient rate of removal of oils, solids and
metals from the waste stream. After the
electro-coagulation reaction has occured in
the electrolytic cell, a small amount of EC+
polymer is injected to quickly clump the
coagulated oils, solids & metals together
for removal. Treated water can be purged
to the Water Maze Indexing Polishing filter
for further treatment, recycled, or discharged
to sanitary sewer.
Features & Benefits:
No standing water in the tanks after processing
No need to process dirty water; water is quickly processed and discharged to sewer or held for recycyle
Modular, compact design with a small foot print
Highly efficient, continual flow batch feed processing system
Processing flow rates up to 20 GPM (gallons per minute)
Variable amp flow / voltage maximizes cell life and water quality
Innovator Series - CoAg - Chemical Coagualtion System Brochure The Water Maze CoAg2-20A System is an advanced chemical treatment system,
using the method of adding a chemical coagulant and polymer to the treatment
process, to efficiently remove suspended solids and emulsified oils from the
waste stream.
The new Water Maze CoAg2-20A System is a very low maintenance, cost effective system to operate. The CoAg2-20A can be used on its own as the primary
water treatment system, or as a pre-treatment system with other technologies,
such as Electro-Coagulation or Bioremediation.
Features & Benefits:
Processing flow rates up to 20 GPM (gallons per minute)
No standing water in the tanks after processing - water is
processed and discharged; eliminates need for odor control
Modular and compact, uses inline mixing tubes for coagulant
Modular, can be used alone or as a pre-treatement system
Batch feed, continual flow processing system through two
150 gallon cone-bottom tanks
Innovator Series - Indexing Polish Filter Brochure
The Indexing Polishing Filter (IPF) can be
applied as pretreatment, or post treatment to
another water treatment technology to remove
particulates. The IPF comes with adjustable
support legs to accommodate different sump
sizes. Or, it can be lowered over the top of an
existing sump drain.
The IPF employs various micron size
media paper to filter out particulates in water.
Made of both stainless steel and carbon steel. The stainless steel is
applied where there is a potential for standing
water.
The paper roll holder is equipped with
a sensor that will signal the end of the
paper roll.
Sludge tub for collecting spent paper
and solids is included with base unit.
Innovator Series - Clean Water Recycling Module Brochure The Clean Water Recycle Moduleautomatically manages the flow of
treated water for reuse. It can be applied as a stand-alone module for
the Water Maze EC2 system or CoAg system, and may also be applied
to other applications where water recycling is required.
Consists of a control module with a small footprint, and
an optional holding tank
Equipped with an onboard infeed
pump (up to 20 GPM), and a transfer pump (up to 20 GPM).
Control Floats are included for installation within the holding tank.
Equipped with an automatic fresh water make up system, and automatic excess water discharge system.
Circulation pump with mazzei injection to manage clean water.
Advanced Biological Treatment
Systems
for Golf, Commercial
and Industrial Waste Water Recycle or Sewer Discharge
Modular BioSystems for Total Flexibility
Easy to Maintain with Automatic Purge
Tank Capacity: 600 gal
Tank Material: Polyethylene
Bio-Media: 2087 sq.ft
In-Feed / Circulation Pump: 3/4 HP
All-Natural Systems
Sewer Discharge Systems:
Electrical Configuration: 120V 1ph
Recycle Systems:
Transfer Pump: 3/4 HP (2 HP optional)
Ozone Pump: 3/4 HP
Ozone Generator: Ultraviolet 4-Tube
Electrical Configurations:
A 230V 1ph
B 230V 3ph
Aeration: Vacuum Bubble Technology™ (VBT)-100 “Airstick”
Note:
VBT™ Aerators are an extremely efficient way
to aerate a body of water.
The
technology produces extremely small bubbles, which transfer much more oxygen to the water than any other
type of aeration.
Click on above Picture to Enlarge View
Watermaze CLB Bioremediation System
shown in cross section view in typical installation.
Processing Rate varies for each site. Factors that must be
considered are:
Average daily flow
(gallons per day)
BOD levels (ppm)
Oxygen input (dissolved
oxygen)
Hydraulic retention
time (HRT)
Total petroleum
hydrocarbons (TPH)
Water temperature
and pH
Based on these factors Industrial Equipment sales engineers
will calculate the estimated processing rate and make a recommendation as to the size of system you will need
The Vacuum Bubble® Technology Aerators are an extremely efficient way to aerate a body of water. The
technology produces extremely small bubbles, which transfer much more oxygen to the water than any other
type of aeration. This significantly reduces the horsepower required per oxygen demand
Benefits:
Elimination of Odors
Reduction in BOD and TSS
Reduction of Solid Waste
Disposal
Reduction in Algal Growth
Reduction in Contamination
of Groundwater
Note: All units
are available with a foam-filled polyethylene float.
Back to Top
Bioremediation - Pit Management System
Economical Waste Water Treatment
of Complex Waste Streams Using
Electrocoagulation Technology
Watermaze proprietary EC+Plus™ Technology,
featuring a unique integration of electrocoagulation
and polymer injection,
results in highly effective treatment of a
broad range of waste streams including
suspended solids, emulsified oils and
heavy metals — all major obstacles for
conventional filtration systems.
Fully automated: Recycle or discharge
Process flow rates: up to 6 GPM
Treats most complex waste streams: Emulsified oils, TPH, suspended
solids, & heavy metals.
Water quality: Meets most, if not all, local regulations
No filters to be cleaned or purchased
over and over
Minimal sludge to be disposed of
Minimal operating costs resulting in a
quick return on investment
Operates for as little as 1/4-cent per gallon
Low maintenance because the unit is
self-cleaning
No hazardous chemicals needed to be
brought in, stored or handled
Conventional Waste Water
Evaporator with High-Efficiency
Combustion Chamber
How evaporation can save hauling fees
It can cost $1.75 or more per gallon to have waste water
hauled off. That fee is incurred even though most
industrial waste waters consist of 95% water and only 5%
contaminant. An HBG waste water evaporator reduces the 95%
water content for as little as $0.16 per gallon (**). That
means you only have to haul off the 5% — minimizing both
your cost and liability.
** Costs vary for each waste water treatment installation. Industrial Equipment can work up an estimate of hauling cost savings you might expect, based on your specific site and waste water treatment system.
Evaporation Rate: up to 30 gal/hr
Natural Gas, Propane, Diesel or Electricity
BTU Per Hour: up to 390,000 BTU/hr
Electrical Configuration: 120V 1ph
( Electrical Heated is 230V 3ph or 460V 3ph)
Compressed Air: 4 cfm @ 60-100 psi
Tank Capacity: up to 125 gal
(Electrical Heated is 55 gal)
Tank Material: Carbon Steel (3/16" walls, 3/8" floor)
Insulation: Double Walled
Exhaust Stack: 10" Stainless Steel
ETL Safety Certified to UL-795
Upgrade options include:
Stainless steel tank upgrades from carbon steel
Automatic
water fill factory conversion kit
Conversion kits and accessories
Motorized
belt oil skimmer
Foam suppression system
Click on above Picture to Enlarge View Watermaze HBG Evaporator section view illustraing internal evaporation processing.
Super Energy-Efficient Waste Water
Evaporator with Patented Design
Using Submerged Combustion
Technology
How evaporation can save hauling fees
It can cost $1.75 or more per gallon to have waste water
hauled off. That fee is incurred even though most
industrial waste waters consist of 95% water and only 5%
contaminant. A WB waste water evaporator reduces the 95%
water content for as little as $0.12 per gallon (**). That
means you only have to haul off the 5% — minimizing both
your cost and liability.
** Costs vary for each waste water treatment installation. Industrial Equipment can work up an estimate of hauling cost savings you might expect, based on your specific site and waste water treatment system.
Evaporation rate: up to 120 Gallons per Hour
Natural Gas or Liquid Propane
Fuel Usage: up to 1,142,000 BTU
100% Heat Exchanger Efficiency
Compressed Air: 10 CFM @ 20-100 psi
Vent Stack: up to 12"
Tank Capacity: up to 170 gal
Tank Material: up to 316L SS (12 gauge)
Electrical Configuration: 220V 1ph
ETL Safety Certified to UL-795
Upgrade options include:
Stainless steel tank upgrades from 316L SS (12 gauge) to AL-6XN corrosion-resistant stainless steel alloy for resistance to higher chloride concentrations
Waste water
flame injection system
Conversion kits and accessories
Foam detection system
Flue pipe rain shield
Click on above Picture to Enlarge View Watermaze WB Evaporator section view
illustraing internal evaporation processing.
Industro-100: Hydrocarbon Adsorption Media
The Industro-100 system uses advanced hydrocarbon adsorption media to effectively process many types
of waste streams. The process greatly reduces the level of oils and grease in the waste stream. In many cases
this filter can be used as a final polishing step after the water has been processed through an oil/water
separation type system.
Multimedia/Sand: Solids Filtration Media
Multi-media, and/or in some cases sand, may be used to remove suspended solids from a waste stream.
Note: Other Media available such as: Activated Carbon or Walnut Shells.
FEATURES:
Split -tank design opens easily to allow
convenient access for cleaning or changing
filtration media.
Posi-Lok™ clamps are safe and designed for
easy access.
Dura-glas® exterior is durable, lightweight
and corrosion resistant for years of trouble-free
operation, regardless of temperature extremes.
Features 10-year warranty on filter tank.
Easy-to-read operating label keeps important
instructions in plain view for quick and easy
reference. Sleek black tank profile blends well into any
landscape design.
Sand filtration assembly. 16 laterals provide
both efficient filtration and backwash cycles.
Combination centrifugal separator and up-flow cartridge filter in a single compact
design with one single cartridge for easy
installation, removal and service. Separates dense solids
prior to cartridge filtration for extended filter life,
increased dirt holding capacity and
reduced maintenance costs.
Components include outer chamber for particle separation,
inner chamber for cartridge filtration and built-in drain for purge,
if required.
Three types of cartridge filters are available for Hurricane filter housings:
(1) Standard pleated polyester filter elements: Polyester-Plus™ filter media is cleanable and cartridges are reusable in
most applications and micron ratings. Cartridges can separate solids in liquids with a pH of 3 to 11. Filter cartridges available with nominal micron ratings from 0.35 to 150.
(2) Poly-Pleat™ Cartridges for One Micron Absolute Rated Filtration:
Poly-Pleat cartridges are designed for drinking water applications to remove Cryptosporidium and Giardia
Cysts and when one micron absolute rated filtration is required. Polypropylene filter media offers compatibility with many aggressive chemicals.
(3) Activated carbon cartridges: Activated carbon cartridges are for taste, odor and chlorine removal. High
carbon content for extended throughput. Outer wrap of pleated five micron Polyester-Plus™ filter media to protect the carbon by removing sediment and extend filter life.
Features standard on all Hurricane Filters:
Outer chamber for particle separation
Inner chamber for cartridge filtration
Tangential liquid entry:
Liquid enters the filter tangentially to
provide rotational flow and centrifugal
force for particle separation.
Rotational flow pattern:
Continuously "fluffs" filter cake to increase
dirt and debris holding capacity to extend
filter life and time between cleaning.
304 stainless steel filter housings
Electro polished for superior finish
Fail-safe lids with individual studs for security and brass wing nuts for
easy closure without tools
Rim Gaskets: EPDM
(Buna-N, Viton available)
Standpipe: CPVC
Pressure: 150 psi (max.) - couplers for pressure gauges provided in inlet
Temperature: 140°F (max.)
Outlet: 90° elbow and 45° sweep for staggered in-line vertical installation
Drain for manual or automatic purge
Upgrade options include:
Chemical resistant coatings
316 Stainless Steel
Temperature: up to 250°F (max) with optional
stainless steel standpipe &
high temperature cartridges installed
Deep, angled pleats are directed toward rotational flow for increased dirt holding capacity.
Unlike conventional designs, Hurricane’s patented cartridges are
made with deep, angled pleats to direct the flow into the pleated
area for increased solids removal.
Easy cartridge filter removal.
Standard Pleated Polyester Filter Cartridges
are cleanable andreusable in most
applications and
micron ratings.
Modular Clarifiers Capable of
Sewer Discharge or
Pre-Treatment for Recycling of Wash-Water.
A secret of the CL system is the effectiveness of the ten
Coalescing Cones, which provide 90-490 sq.ft. of oleophilic or
oil-loving polypropylene. The cone-shaped design forces the water
to the edges of the tank creating the effect of water flowing from a
1-1/2 inch pipe into a 4-ft. tunnel. The reduction in velocity is dramatic and enhances the separation process causing oil droplets to group
and float, solids to sink, and also prevents channeling.
Flow Rates: up to 30 GPM
Self-Contained yet Modular Flexibility
Clean Water Manifold
System
Above-Ground Design: No Large, Costly PIts
Oil Surface Skimmer
Solids Separator Chamber
Oil/Water Separator: up to 600 gal.
Electrical Configuration:
A 230V 1ph
B 230V 3ph
C 460V 3ph
Sanitizing Method: Ozone, Series 400 or Chlorination
Coalescing Pack: up to 490 sq.ft.
Multi-Media Filter:
330 lbs. of a proprietary
blend of gravel,
sand and anthracite
Holding Tanks: up to 65 gal.
Steel Frame and Railing: heavy-duty, durable, epoxy
powder coat finish
Click on above Picture to Enlarge View
Watermaze CL Oily-Water Separator Systems
cross section illustraing internal processing.
Note:
Must add Filter Pac III in order to recycle wash water with CL-603A,B,C models.
Filter Pac III provides additional
filtration so water can be recycled. It has
330 lbs. of media, 300 lbs. of virgin
activated carbon for hydrocarbon
removal, and 500 sq. ft. of area of
5-20 micron cartridge filtration.
Upgrade options include:
Auto Purge system that automatically removes solids from
cone-bottom tank (not applicable to CL-30)
Automated ORP/pH Controller with dual variable speed peristalic metering pumps - monitors and injects pH balancing agent and/or oxidizer for optimum water treatment and odor control.
