Site Consultation!
over the phone
1-800 287-8306

• Innovator Series    
  • EC2 - Electro-coagulation - with Boat Washing and Marina Application
  • CoAg - Chemical Coagulation
  • CoAg - Compact - Chem Coagulation
  • Indexing Polish Filter
  • Clean Water Recycling Module
• Bioremediation
  • CLB Systems
  • CLB-GC Systems - Golf Course
• Bioremediation - Pit Management
• PM 1000 Systems
• Aeration
  • Vacuum Bubble® Technology
• Evaporation
  • IE Water Eliminator - Custom
  • HBG Systems
  • WB Systems
• Filtration
  • IE Media Filtration System (Industro-100 ) - Custom
    • Hydrocarbon Adsorption Media
    • Reuseable Walnut Shell Media
  • IE Portable Filtration Skid - Custom
  • CLP Systems
  • Hurricane Micron Filters
• Oily-Water Separators
  • CL Systems
  • Alpha System
• Mobile Wash/Reclaim Systems
  • Mobile Wash/Reclaim Sytems

Watermaze Equipment Full Line
Animation

Click here for list of our Green Products.

Click here for Water Collection,
Wastewater Reclamation/Recapture
for reuse, discharge or treatment.

GSA Pricing
to those who qualify

PDF files require

• No standing water in the tanks after processing
• No need to process dirty water; water is quickly processed and discharged to sewer or held for recycyle
• Modular, compact design with a small foot print
• Highly efficient, continual flow batch feed processing system
• Processing flow rates up to 20 GPM (gallons per minute)
• Variable amp flow / voltage maximizes cell life and water quality
• Patent pending design

• Processing flow rates up to 20 GPM (gallons per minute)
• No standing water in the tanks after processing - water is processed and discharged; eliminates need for odor control
• Modular and compact, uses inline mixing tubes for coagulant
• Modular, can be used alone or as a pre-treatement system
• Batch feed, continual flow processing system through two 150 gallon cone-bottom tanks

• The IPF employs various micron size media paper to filter out particulates in water.
• Made of both stainless steel and carbon steel. (Stainless steel where there is a potential for standing water)
• The paper roll holder is equipped with a sensor that will signal the end of the paper roll.
• Sludge tub for collecting spent paper and solids is included with base unit.
• Optional: Discharge Pump available.

• Consists of a control module with a small footprint, and an optional holding tank
• Equipped with an onboard infeed pump (up to 20 GPM), and a transfer pump (up to 20 GPM).
• Control Floats are included for installation within the holding tank.
• Equipped with an automatic fresh water make up system, and automatic excess water discharge system.
• Circulation pump with mazzei injection to manage clean water.

Advanced Biological Treatment Systems
for Golf, Commercial and Industrial Waste Water Recycle or Sewer Discharge

Check out of how CLB Bioremediation System works!

Modular BioSystems for Total Flexibility Easy to Maintain with Automatic Purge Tank Capacity: 600 gal Tank Material: Polyethylene Bio-Media: 2087 sq.ft Sewer Discharge Systems: Electrical Configuration: 120V 1ph Recycle Systems: Electrical Configurations: A    230V   1ph B    230V   3ph Aeration: Vacuum Bubble Technology™ (VBT)-100 “Airstick”   Note: VBT™ Aerators are an extremely efficient way to aerate a body of water. The technology produces extremely small bubbles, which transfer much more oxygen to the water than any other type of aeration.		Click on above Picture to Enlarge View Watermaze CLB Bioremediation System shown in cross section view in typical installation. Video showing VBT Bubble Size Comparison to Disc Diffuser.
Processing Rate varies for each site. Factors that must be considered are:
Average daily flow (gallons per day) BOD levels (ppm) Oxygen input (dissolved oxygen) Hydraulic retention time (HRT) Total petroleum hydrocarbons (TPH) Water temperature and pH		Based on these factors Industrial Equipment sales engineers will calculate the estimated processing rate and make a recommendation as to the size of system you will need

Back to Top

The Vacuum Bubble® Technology Aerators are an extremely efficient way to aerate a body of water. The technology produces extremely small bubbles, which transfer much more oxygen to the water than any other type of aeration. This significantly reduces the horsepower required per oxygen demand

• Benefits:
  • Elimination of Odors
  • Reduction in BOD and TSS
  • Reduction of Solid Waste Disposal
  • Reduction in Algal Growth
  • Reduction in Contamination of Groundwater
• Note: All units are available with a foam-filled polyethylene float.

Automatic Pit Management System Using Bioremediation for Odor Control

Fits Most Brands of Water Treatment Systems Installation: Easy In-Field Reduces Odor Effectively Steel Cabinet Sandstone Diffuser: Specially designed to create minute bubbles for maximum oxygen surface area in aeration process 24-hour timer: Automatic delivery of aeration and biological treatment Uses BioStax 1800: Fast-Acting Liquid Microbes consume oil, grease, and hydrocarbons Concentrates make 5 and 55 Gallons Non-Toxic All Natural

Click on above Picture to Enlarge View See Bioremediation Consumable Chemicals Catalog BioStax 18oo

Back to Top

Get Rid of Wash Water the Easy Way!

Industrial Equipment custom designed and assembled this IE Water Eliminator to be an efficient and reliable Evaporator. It evaporates your waste water and concentrates the remaining sludge in a DOT drum for easy hauling. It can reduce the amount of hauling or water discharge by more than 95%.

The IE Water Eliminator can be used as a stand alone system for low volume applications or as an addition to a recycle system. When used with a recycle system it will significantly improve wash water quality by removing debris and TDS on a regular basis.

Conventional Waste Water Evaporator with High-Efficiency Combustion Chamber

How evaporation can save hauling fees
It can cost $1.75 or more per gallon to have waste water hauled off. That fee is incurred even though most
industrial waste waters consist of 95% water and only 5% contaminant. An HBG waste water evaporator reduces the 95% water content for as little as $0.16 per gallon (**). That means you only have to haul off the 5% — minimizing both your cost and liability.

** Costs vary for each waste water treatment installation. Industrial Equipment can work up an estimate of hauling cost savings you might expect, based on your specific site and waste water treatment system.

Evaporation Rate: up to 30 gal/hr Natural Gas, Propane, Diesel or Electricity BTU Per Hour: up to 390,000 BTU/hr Electrical Configuration: 120V 1ph ( Electrical Heated is 230V 3ph or 460V 3ph) Compressed Air: 4 cfm @ 60-100 psi Tank Capacity: up to 125 gal (Electrical Heated is 55 gal) Tank Material: Carbon Steel (3/16" walls, 3/8" floor) Insulation: Double Walled Exhaust Stack: 10" Stainless Steel ETL Safety Certified to UL-795 Upgrade options include: Stainless steel tank upgrades from carbon steel Automatic water fill factory conversion kit Conversion kits and accessories Motorized belt oil skimmer Foam suppression system

Click on above Picture to Enlarge View Watermaze HBG Evaporator section view illustraing internal evaporation processing.

Super Energy-Efficient Waste Water Evaporator with Patented Design Using Submerged Combustion Technology

How evaporation can save hauling fees
It can cost $1.75 or more per gallon to have waste water hauled off. That fee is incurred even though most
industrial waste waters consist of 95% water and only 5% contaminant. A WB waste water evaporator reduces the 95% water content for as little as $0.12 per gallon (**). That means you only have to haul off the 5% — minimizing both your cost and liability.

** Costs vary for each waste water treatment installation. Industrial Equipment can work up an estimate of hauling cost savings you might expect, based on your specific site and waste water treatment system.

Evaporation rate: up to 120 Gallons per Hour Natural Gas or Liquid Propane Fuel Usage: up to 1,142,000 BTU 100% Heat Exchanger Efficiency Compressed Air: 10 CFM @ 20-100 psi Vent Stack: up to 12" Tank Capacity: up to 170 gal Tank Material: up to 316L SS (12 gauge) Electrical Configuration: 220V 1ph ETL Safety Certified to UL-795 Upgrade options include: Stainless steel tank upgrades from 316L SS (12 gauge) to AL-6XN corrosion-resistant stainless steel alloy for resistance to higher chloride concentrations Waste water flame injection system Conversion kits and accessories Foam detection system Flue pipe rain shield

Click on above Picture to Enlarge View Watermaze WB Evaporator section view illustraing internal evaporation processing.

Back to Top

• AVAILABLE WORKING INGREDIENTS:
  • Industro-100: Hydrocarbon Adsorption Media
    The Industro-100 system uses advanced hydrocarbon adsorption media to effectively process many types
    of waste streams. The process greatly reduces the level of oils and grease in the waste stream. In many cases
    this filter can be used as a final polishing step after the water has been processed through an oil/water
    separation type system.
  • Multimedia/Sand: Solids Filtration Media
    Multi-media, and/or in some cases sand, may be used to remove suspended solids from a waste stream.

    Note: Other Media available such as: Activated Carbon or Reuseable Walnut Shells.

• FEATURES:
  • Split -tank design opens easily to allow convenient access for cleaning or changing filtration media.
  • Posi-Lok™ clamps are safe and designed for easy access.
  • Dura-glas® exterior is durable, lightweight and corrosion resistant for years of trouble-free operation, regardless of temperature extremes. Features 10-year warranty on filter tank.
  • Easy-to-read operating label keeps important instructions in plain view for quick and easy reference.
    Sleek black tank profile blends well into any landscape design.
  • Sand filtration assembly. 16 laterals provide both efficient filtration and backwash cycles.
    
    

   4 to 14 Times the Filter Capacity

Industrial Equipment custom designed and assembled this IE Portable Filtration Skid to be an efficient and reliable Mobile Filtration System, which will remove solids from waste streams down to approximately 5 microns as well as remove oils.

The IE Portable Filtration Skid can be placed on a trailer and hooked up to a water storage tank, so the the water is continuously reused by a pressure washer.

The Skid is operated in conjunction with a Vacuum Water Collection System (Customer provided) that supplies waste water to the Oil-Water-Solids Separator and a Generator (Customer provided) or other power supply for the filter Pump.

Separator & Cartridge Filter in One!

Combination centrifugal separator and up-flow cartridge filter in a single compact design with one single cartridge for easy installation, removal and service. Separates dense solids prior to cartridge filtration for extended filter life, increased dirt holding capacity and reduced maintenance costs.

Components include:

• Outer chamber for particle separation
• Inner chamber for cartridge filtration
• Built-in drain for purge, if required.

1. Standard Pleated Polyester Filter Cartridges:
   Polyester-Plus™ filter media is cleanable and cartridges are reusable in most applications and micron ratings. Cartridges can separate solids in liquids with a pH of 3 to 11. Filter cartridges available with nominal micron ratings from 0.35 to 150.
2. Poly-Pleat™ Cartridges for One Micron Absolute Rated Filtration:
   Poly-Pleat cartridges are designed for drinking water applications to remove Cryptosporidium and Giardia Cysts and when one micron absolute rated filtration is required. Polypropylene filter media offers compatibility with many aggressive chemicals.
3. Activated Carbon Cartridges:
   Activated carbon cartridges are for taste, odor and chlorine removal. High carbon content for extended throughput. Outer wrap of pleated five micron Polyester-Plus™ filter media to protect the carbon by removing sediment and extend filter life.
   

Deep, angled pleats are directed toward rotational flow for increased dirt holding capacity.

Easy cartridge filter removal.

Standard Pleated Polyester Filter Cartridges cleanable & reusable in most applications and micron ratings.

Back to Top

Modular Clarifiers Capable of Sewer Discharge or Pre-Treatment for Recycling of Wash-Water.

A secret of the CL system is the effectiveness of the ten Coalescing Cones, which provide 90-490 sq.ft. of oleophilic or oil-loving polypropylene. The cone-shaped design forces the water to the edges of the tank creating the effect of water flowing from a 1-1/2 inch pipe into a 4-ft. tunnel. The reduction in velocity is dramatic and enhances the separation process causing oil droplets to group and float, solids to sink, and also prevents channeling.

Flow Rates: up to 30 GPM Self-Contained yet Modular Flexibility Clean Water Manifold System Above-Ground Design: No Large, Costly PIts Oil Surface Skimmer Solids Separator Chamber Oil/Water Separator: up to 600 gal. Electrical Configuration: A    230V   1ph B    230V   3ph C    460V   3ph Sanitizing Method: Ozone, Series 400 or Chlorination Coalescing Pack: up to 490 sq.ft. Multi-Media Filter: 330 lbs. of a proprietary blend of gravel, sand and anthracite Holding Tanks: up to 65 gal. Steel Frame and Railing: heavy-duty, durable, epoxy powder coat finish

Click on above Picture to Enlarge View Watermaze CL Oily-Water Separator Systems cross section illustraing internal processing.

Note:
Must add Filter Pac III in order to recycle wash water with CL-603A,B,C models.
Filter Pac III provides additional filtration so water can be recycled. It has 330 lbs. of media, 300 lbs. of virgin activated carbon for hydrocarbon removal, and 500 sq. ft. of area of 5-20 micron cartridge filtration.

Upgrade options include:

• Auto Purge system that automatically removes solids from cone-bottom tank (not applicable to CL-30)
• Automated ORP/pH Controller with dual variable speed peristalic metering pumps - monitors and injects pH balancing agent and/or oxidizer for optimum water treatment and odor control.
• Corona Discharge (CD) Ozone Generator - Extra-high output

Back to Top